R47 - 4 Zone Programmer [Pre 2023] - EPH Controls (2024)

FAQs

How to reset eph controls? ›

Press the or buttons to adjust from 5/2d to 7d or 24h mode. Press the 'AUTO' button or wait 5 seconds and the thermostat will return to normal operation. Press the 'MAN' button to enter Manual Mode (Permanent Override). 'MAN' will appear on the screen.

Press the BOOST button 1, 2, or 3 times, the time that the boost will be activated to will flash on the screen. If you do not press any other button, the boost will activate to the temperature displayed on the screen after 5 seconds. If you press the OK button, the temperature will now flash.

Yes, your heating system can still be controlled locally via your programmer and thermostats. Can I control more than 1 home from my smartphone? Yes, EMBER allows you to control multiple homes from your smartphone.

There is usually a small reset button somewhere on the thermostat. Finding this button may require that the thermostat panel be removed and pressing this button may require something like a paperclip to push. Hold the reset button down for 5 seconds and the thermostat should reset.

For note, I've had this thermostat in place for nearly 4 years, never once had an issue with it. Responds immediately and batteries last around 3 years (2 x AA batteries). Really can't fault it for controlling my Worcester Bosche boiler and would highly recommend it to anyone.

a) Lower the cover on the front of the unit. b) Press the 'SELECT HOT WATER' button to change between settings for Hot Water Zone. c) Repeat this process for HEATING by pressing the 'SELECT HEATING' button. This function allows the user to turn ON the Heating or Hot Water for a period of 1 hour.

The boost button on your electricity meter allows you to heat your hot water immediately, rather than waiting for off-peak hours. The boost button is also referred to as the hot water boost button. The boost button is usually only available for those who have off-peak hot water heating.

Although primarily used to control water heating, this switch can also be used for many applications, including the control of panel heaters, lighting or combi boilers. This product includes a double pole switch and replaceable fuse for added protection.

What should heating thermostat be set at? ›

Dropping the thermostat temperature within your home is one of the best ways to ensure your home heating is efficiently managed. Even just a difference of 1 degree celsius can have a large impact in your overall heating bills. Generally, anywhere between 19-21 degrees celsius should be comfortable for most homes.

Press the Smartlink / WPS button once. The LEDs will stop flashing for 5 seconds. Once the LEDs begin to flash again, press the crystal button 3 times. This will reset all RF connections to the gateway.

Turn your thermostat “off”, then flip the related circuit breaker “off”. Wait 30 seconds, then turn the breaker back “on,” then the thermostat. Set the thermostat to hot or cold, whichever you prefer, and your desired temperature. This should effectively reset it.